PTNZ540B COLUMN TYPE OF VERTICAL DRILLING MACHINE
Features:
¡¤ 3- phase with two-voltage collocation
¡¤ Gear shift
¡¤ Superior quality of gears with harded and lapped gears of surface
¡¤ The model of machines with A is electromagnetism clutch transmission
feed, with B is mechanical feed, without A and B is manual feed.
Depth gauge and tachometer
Fender
Lifting worktable by motor
|
Model |
PTNZ535/535A/535B | PTNZ540A/540B | PTNZ550A/550B |
| Max. drilling diameter. (steel) and tapping diameter | ¦µ35/M22mm | ¦µ40/M24mm | ¦µ50/M27mm |
| Max. travel of spindle | 160 mm | 190 mm | 200 mm |
| Max. distance from spindle to generating line of column | 320 mm | 340 mm | 360 mm |
| Max. distance from spindle nose to surface of worktable | 585 mm | 665 mm | 590 mm |
| Max. distance from spindle nose to surface of base worktable | 1140 mm | 1195 mm | 1175 mm |
| Max. travel of worktable and bracket /Manual (Mechanical) | 545 mm | 570(450) mm | 530(410) mm |
| Swivel angle of worktable | ¡À45¡ã | ¡À45¡ã | ¡À45¡ã |
| Spindle taper bore | MT4 | MT4 | MT4 |
| Spindle speed steps | 12 | 12 | 12 |
| Spindle speed range | 125~3030 r/min | 76~2065 r/min | 52~1400 r/min |
| Spindle feed steps | 3 (PTEZN5035A/PTEZN5035B) | 3 | 4 |
| Spindle feed range (mm/r) | 0.1~0.3 (PTEZN5035A/PTEZN5035B) | 0.1~0.3 | 0.1~0.4 |
| Dimension of worktable | 500x420 mm | 520x440 mm | 580x460 mm |
| Effective working area of worktable | 400x360 mm | 405x395 mm | 445x435 mm |
| Diameter of column | ¦µ120 mm | ¦µ140 mm | ¦µ160 mm |
| Power of motor | 1/1.2 kw | 1.5 kw | 12.2 kw |
| Machine dimension | 835x510x1730 mm | 849x545x2290 mm | 940x680x2405 mm |
| Net weight and gross weight | 430/475 KG | 565/615 KG | 620/675 KG |
| Mode of spindle feed | Manual / Electromagnetism / Mechanical | Electromagnetism / Mechanical | Electromagnetism / Mechanical |
| ¡¡ | ¡¡ | ¡¡ | ¡¡ |
¡¡