PT180 MULTI-PURPOSE MACHINE:

pt180

APPLICATION

 This machine is a multi-purpose machine tool of bench type. It is mainly used to lathe, drill, mill (vertically) in metal, wood and other materials especially suitable for small and middle-size manufactures and repairing shops, it can also be used to make teaching aids, experiment devices and artware, etc for schools, hospitals institutes and even for families. The users will be satisfied with their products out of this very machine.

It has passed three kinds of safely authentication of "CE":89/392EEC、93/68EEC、89/336EEC directives.
　

PARAMETER

 PT180
Cutting Max. swing diameter over bed  125 mm
Max. length of workpiece 180 mm
Max. swing diameter over tool carrier 60 mm
Spindle bore 9 mm
Taper of hole in spindle morse No.1
Metric thread kinds on processing 10
Metric thread pitch on processing 0.25-1.0 mm
Inch thread kinds on processing 10
Inch thread pitch on processing 22-64 1/n´´
Longitudinal feed grade 2
Longitudinal feed on spindle tool carrier 0.07-0.14 m/r
Max. stroke on taper hole 18 mm
Taper of hole in tailstock No.1
Spindle speed step 5
Spindle speed scope 560-2500 r/min
DRILLING Max. drilling capacity 6 mm
Distance from bench to spindle nose 120-180 mm
Distance between spindle center and the surface of column 125 mm
Swivel-angle of the milling and drilling headstock around the column 360＜
Spindle speed step 10
Spindle speed scope 500-2500r/min
MILLING Bench width 60 mm

Bench length

 85 mm

width of "T" shape groove on bench

 8 mm

Stroke on spindle hole

40 mm

Taper of hole in milling spindle morse

 No.1

Electric motor

120W  110V(220V) 60Hz(50Hz)
OTHERS

Net weight

 15Kg

Overall dimension

 5200〜3000〜4100 mm
STANDARD ACCESSORIES

　

1. 3-jaw chuck
2. Dead centers
3. Allen wrench
4. Single open end wrench
5. Double open end wrench
6. Drill chuck arbor
7. Tapered drift
8. Drill chunk
9. Change gear(13 set)