PT470 MULTI-PURPOSE MACHINE:

pt470

APPLICATION

 This machine is a multi-purpose machine tool of bench type. Which mainly function are lathe, drill, mill etc, and has passed three kinds of safely authentication of "CE":89/392EEC、93/68EEC、89/336EEC directives.
　

PARAMETER

 PT470
Cutting Max. swing diameter over bed  300 mm
Max. length of workpiece 470 mm
Max. swing diameter over tool carrier 140 mm
Spindle bore 26 mm
Taper of hole in spindle morse No.4
Max. cross stroke over tool carrier 160 mm
Max. longitudinal stroke over small tool carrier  80 mm
Metric thread kinds on processing 14
Metric thread pitch on processing 0.5-3.0 mm
Inch thread kinds on processing 20
Inch thread pitch on processing 11-40 1/n´´
Longitudinal feed grade 2
Longitudinal feed on spindle tool carrier 0.075-0.15 m/r
Max. stroke on taper hole 40 mm
Taper of hole in tailstock No.3
Spindle speed step 6
Spindle speed scope 160-1600 r/min
DRILLING Max. drilling capacity 15 mm
Distance from bench to spindle nose 170-250 mm
Distance between spindle center and the surface of column 175 mm
Swivel-angle of the milling and drilling headstock around the column 360＜
Milling drilling headstock vertical lifting  80 mm
Spindle speed step 12
Spindle speed scope 125-1600r/min
MILLING Bench dimension 425〜150 mm

Taper of hole in milling spindle morse

 No.3

Stroke on spindle hole

 80 mm

Electric motor

550W  110V(220V)  60Hz(50Hz)
OTHERS

Net weight

 180 Kg

Overall dimension

 1060〜540〜750 mm
STANDARD ACCESSORIES

　

1. 3-jaw chuck
2. Dead centers
3. Allen wrench
4. Single open end wrench
5. Double open end wrench
6. Drill chuck arbor
7. Tapered drift
8. Drill chunk
9. Change gear(13 set)