PT500 MULTI-PURPOSE MACHINE:

pt500

APPLICATION

 This machine is a multi-purpose machine tool of bench type. It is mainly used to lathe, drill and mill. Which is controlled by two motor. It can be realized power feed on longitudinal or crosswise, No strop to realized. the functions of revolution and negative. It is passed three kinds safely authentication of "CE":89/392EEC、93/68EEC、89/336EEC directives.
　

PARAMETER

 PT500
Cutting Max. swing diameter over bed  300 mm
Max. length of workpiece 500 mm
Max. swing diameter over tool carrier 140 mm
Spindle bore 26 mm
Taper of hole in spindle morse No.4
Max. cross stroke over tool carrier 200 mm
Max. longitudinal stroke over small tool carrier  80 mm
Metric thread kinds on processing 14
Metric thread pitch on processing 0.5-3.0 mm
Inch thread kinds on processing 20
Inch thread pitch on processing 11-40 1/n´´
Longitudinal feed grade 20
Cross feed grade 20
Longitudinal feed on spindle tool carrier 0.036-1.43 m/r
Cross feed on spindle tool carrier 0.003-0.134 m/r
Max. stroke on taper hole 50 mm
Spindle speed step 6
Spindle speed scope 160-1600 r/min
Electric motor  550w  110v(220v)  60Hz(50Hz)
DRILLING Max. drilling capacity 20 mm
Distance from bench to spindle nose 240-320 mm
Distance between spindle center and the surface of column 310 mm
Swivel-angle of the milling and drilling headstock around the column 360＜
Milling drilling headstock vertical lifting  80 mm
Spindle speed step 9
Spindle speed scope 315-2000r/min
MILLING Bench width 150 mm

Bench length

 425 mm

Electric motor

370W  110V(220V)  60Hz(50Hz)
OTHERS

Net weight

 230 Kg

Overall dimension

 1100〜550〜740 mm
 STANDARD ACCESSORIES

1. 3-jaw chuck
2. Dead centers
3. Allen wrench
4. Single open end wrench
5. Drill chuck
6. Tapered drift
7. Rocker
8. Change gear(13 set)