PTB3092 >>> Shenzhen Poly Top Industry Development Co., Ltd.

PTB3092 MULTI-PURPOSE MACHINE:

APPLICATION

The machine is a multi-purpose machine tool of bench type. It is mainly used to lathe, drill and mill (vertically) in metal, wood and other materials especially suitable for manufacturers and repairing shops. It can also be used to make teaching aids, experiment devices and artware, etc for school, hospitals, institutes and even for families, The users will be satisfied with their products out of this very machine.
　

PARAMETER		PTB3092
Cutting	Max. swing diameter over bed	300 mm
	Max. length of workpiece	915 mm
	Max. swing diameter over tool carrier	140 mm
	Spindle bore	38 mm
	Taper of hole in spindle morse	No.5
	Max. cross stroke over tool carrier	160 mm
	Max. longitudinal stroke over small tool carrier	80 mm
	Metric thread kinds on processing	12
	Metric thread pitch on processing	0.5-3.0 mm
	Inch thread kinds on processing	20
	Inch thread pitch on processing	11-40 1/n´´
	Longitudinal feed grade	2
	Longitudinal feed on spindle tool carrier	0.12-0.24 m/r
	Max. stroke on taper hole	80 mm
	Taper of hole in tailstock	No.3
	Spindle speed step	9
	Spindle speed scope	250-1600 r/min
	Electric motor	1.1kw 110v(220v) 60Hz(50Hz)
DRILLING	Max. drilling capacity	15 mm
	Distance from bench to spindle nose	250-380 mm
	Distance between spindle center and the surface of column	400 mm
	Swivel-angle of the milling and drilling headstock around the column	360°
	Milling drilling headstock vertical lifting	130 mm
	Spindle speed step	9
	Spindle speed scope	315-2000r/min
MILLING	Bench width	200 mm
	Bench length	425 mm
	width of "T" shape groove on bench	12 mm
	Stroke on spindle hole	127 mm
	Taper of hole in milling spindle morse	No.3
	Electric motor	550W 110V(220V) 60Hz(50Hz)
OTHERS	Net weight	400 Kg
OTHERS	Overall dimension	1650×700×900 mm
Machine base	Base net weight	120 Kg
Machine base	Overall dimension	1620×550×670 mm
STANDARD ACCESSORIES		1. 3-jaw chuck 2. Dead centers 3. Allen wrench 4. Single open end wrench 5. Drill chuck 6. Tapered drift 7. Rocker 8. Change gear(13 set)