HMC40/50-APC Two Working Table Horizontal Machine Center main features:
pthmc50-apc
WORKING TABLE WORKING TABLE 30-STATION TOOLS CHANGER ELECTRIC BOX

  • Column movement (z axis), ¡°©Û¡±-type, advanced constructure , high rigidity, and easy to contact;

  • Adopt imported high rigid linear guideways for X.Y.Z, and increased the travel for X.Y.Z, suitable for model machining and every kinds of middle and smaller cases processing;

  • Stepless speed regulation spindle, unloading tool with hydraulic flow contrary clamping, high speed rigid tapping grarantee by high features spindle motor which equipped position feed back unit;

  • Equiped CNC system, high ¨Cspeed spindle, tool magazine and tool-changer, NC-table, linear-guideways, ball-scress which being imported, the forth axis as required;

  • Optional features: through-the spindle coolant system and around-the spindle coolant system. 0.001 º increase servo table (B-axis). 1 ºincrease teeth-positioned servo-table. Two working tables changed automactically . Linear feed for X.Y.Z axis and complete enclosed type control;

  • More durable spindle for equipped ¡°Air screen¡± to prevent coolant entering , strong torque servo motor drive without any balance setup, developing the movement stationarity and servo following accuracy;

  • Producing 3-D curved surface with high reliable, fine acceleration and out-loading.
ITEM UNIT SPECIFICATIONS
HMC40-APC HMC50-APC
Table table size (l*w) mm*mm 400X400 500X500
t-slots pcs*mm 5X14H7
max. table load kgs 500
min. table index degree standard: 1 , optional 0.001
table center hole mm*mm Dia. 30H7
distance between table to the ground mm*mm 1000
Spindle spindle taper no. NO.40 (taper: 7:24)
spindle motor kw standard: AC7.5/11, Optional: AC 11/15
spindle speed r/min 60-1500-6000
max. spindle torque n.m 70(7.5/11KW), 95.5 (11/15KW)
Magazine toolholder/type of nail no. BT40/LDA 40BT
change speed sec 2.0 (tool to tool)
method of tool selection ¡¡ take the shortest path
tool storage capacity pcs*mm 30
max. tool weight kgs 10
max. tool length mm*mm 300
max. tool dia. mm 80(neighbour) , 150
Travel travel of X/Y/Z axis mm*mm 630,500,520 (APC: 500,430,520)
distrance from spindle center to table mm*mm 100-600
distrance from spindle nose to table mm*mm 120-640
Feed rapid traverse rate (X/Y/Z) m/min 24,16,20
the feed-motor torque of X/Y/Z/B Axis nm 8,22,22,8
Others air pressure kgf/cm2 4  -  6
air consumption l/min 240
hydraulic pressure kgf/cm2 35-40
volume of lubrication tank L 1.8
volume of coolant tank L standard: 160, SP. Coolant: 230
flow/raising of coolant pump L 20L/13M/MIN
volume of oil tank L/MIN,M 65
electricity KVA 40
machine net weight KG 7500
machine size (with chip conveyer) (L*W*H) MM 2700*3090*2630 (WITHOUT CHIP CONVEYER AND CHANGE WORKING TABLE)
CNC system ¡¡ Fanuc Oi MC.  SIEMENS 840D
¡¡ ¡¡ ¡¡ ¡¡