PTQKA120/190/340 CNC PIPE THREADING LATHE
¡¡

  

PTQKA120/190/340 CNC lathes were developed mainly for the turning of oil-pipe threads. They are suitable for the turning of various kinds of pipe threads, and are also can be as universal CNC lathes.

        These CNC pipe thread lathes are controlled by semi-closed circle controlling systems. They are suitable for the turning of circum gyration bodies of various curving generatrixes , the turning distinguish ability is  0.001mm.They can be used to the turning of cylindrical and conical threads, and threads connected continuously by them, and end face threads as well, They have functions of automatic tool compensation, rough-turned piece circle, thread-cutting circle£¬slotting circle, and absolute zero can be set at your will. These machines are suitable for verified work pieces` machining in medium and small batches, and are of good flexibility, high efficiency, finishing up with good conformity, and are easy to program, simple to operate. So they are ideal medium-type mechanical machine equipment 


¡¡
1£®Main specifications: PTQKA120 PTQKA190 PTQKA340
Max. cutting pipe dia. mm 120 190 340
Swing over bed  mm 770 1100
Swing over carriage mm 480 730
Width of bed mm 550 755
Max. length of work piece mm 1000/1500/2000/3000/5000 1500/3000/5000
Max. cutting length mm 800/1350/1800/2800/4800 1300/2800/4800
2£®Spindle:
Taper hole of spindle mm 140 213 412
Diameter of spindle thru hole mm 130 200 355
Type of main spindle center ¡¡ 39145 39145 39150
Main spindle motor kw 11 18.5 ¡¡
Number of spindle speeds ¡¡ MANUL-3 MANUL-2 AUTO-4
AUTO-6 AUTO-4
Range of spindle speeds rpm 25-800 90-450 5-320
Max Travel of cross slide mm 400 540
3£®Tailstock:
Travel of tailstock quill mm 250 300
Quill taper hole  ¡¡ M5 M6
Quill diameter   mm 100mm 160mm
4£®Machine overall size and weight:
Max. weight of work piece kg 1500 5000
Dimension (L /W/H)   mm 3227,3677,4177,5177/1800/1850 ¡¡
Net weight  kg 3900/4200/4700/5200 9.00011E+13
5£®Turret£º
Size of turret mm 240mm¡Á240mm    300mm¡Á300mm
Size of cutter cross section mm 32mm¡Á32mm 40mm¡Á40mm
Position number of turret ¡¡ 4 4
Max. allowable cutting force  P z N 19600N 29400N
Max. allowable force for longitudinal feed  P x N 7840N   11760N
Max. allowable force for longitudinal feed  P x N 5438N 8157N
6.Hydraulic and lubrication system:
Device of automatic lubrication ¡¡ AMO-II-150S AMO-¢ó-150S
Model of gear pump ¡¡ CB-B6 CB¡ªB6
Rated pressure of gear pump MPa 2.54MPa£¨25kgf/cm2£© 2.54MPa£¨25kgf/cm2£©
Flow rate of gear pump L/min 6L/min 6L/min
Working pressure of oil chuck MPa 0.98-2.54MPa£¨10-25kgf/cm2£© 0.98-1.176MPa (10-12kgf/cm2)
7£®Cooling system:
Model of cooling pump ¡¡ AOB-25 JCB-45
Power of cooling motor W 90W 150W
Flow rate of cooling pump L/min 25L/min 45L/min
8£®Driving system:
Model of main motor (frequency conversion) ¡¡ YI60M-4-B3 UABP180L-4-33.3-18.5-1MB3
Main motor power KW 11KW 18.5KW
Rotational speed of motor r/min 1460r/min 960 r/min
Model of V-belt ¡¡ B1855 B1080 C1860
Number of V-belt ¡¡ 4 pieces 5 pieces
¡¡

¡¡

¡¡