PTC150A  Bench Lathe

ptc150a

  • Lathe bed is made of high tensile cast iron in rigid structure. The bedway are hardened and ground

  • The main spindle is equipped with 2 precision taper roller bearings (D7211, D7212)

  • Provide 60 kind metric or inch threads which can be cut by means of levels

  • All gears, bearings and slide surfaces are designed with fully effective lubrication

  • being light in structure and small in energy wastage 1/2 HP motor gives more power suited heavy duty cutting

¡¡SPECIFICATION

 METRIC  INCH
Max.swing over bed 300mm  12"
Max.swing over cross slide 178mm 7"
Max.swing over gap 430mm 17"
Max.length of workpiece 914mm  36"
Max.length of turning  760mm 30"
Hole through Spindle 38mm 1½"

Taper of spindle bore

M.T.NO.5
Range of spindle speeds(9 steps) 60-1500r.p.m.
Taper of quill sleeve M.T.NO.3
Metric threads can be cut(26 kinds)  0.4-7mm
Inch threads can be cut(34 kinds) 4-56T.P.I.
Pitches of three feed leadscrews 3mm 8T.P.I.
Longitudinal feed per revolution of spindle(32 kinds)  0.052-1.392 0.002-0.0548
Cross feed per revolution of spindle(32 kinds) 0.014-0.38 0.0007-0.0187
Max.longitudinal travel of saddle 800mm 31½"
Max.travel of cross slide 175mm 6⅞"
Max.travel of top slide  95mm 3¾"
Max.travel of tailstock sleeve 100mm 4"
Motor horse power 1.5HP(1.1KW)
Motor horse power 60Hz or 50Hz
Motor frequency  380/415V/115/230V or 110/200V
Overall dimensions(L¡ÁW¡ÁH) 1600¡Á730¡Á1270
Net weight 420kg
Packing size(L¡ÁW¡ÁH) 1680¡Á760¡Á1510mm
¡¡ ¡¡ ¡¡

¡¡