TYPE PTTSL VERT./HOR.  ROTARY TABLES:

pttsl160

Features:

     It can be used at horizontal or vertical [0º,90º] When it is used at vertical and a Tailstock is table it is similar to a conventional dividing head in performance.

   Type PTTSL200 and PTTSL160 have 4 T-slots, PTTSL250,PTTSL320 and PTTSL400have T-slots.
    Reading of vernier: 10"

กก

MAIN SPECIFICATIONS:    (mm/in.)

TYPE

 D H A B C E F MT d RATIO Net weight  kg/1bs
TSL160 160/6.30 85/3.35 196/7.72 242/9.53 125/4.92 10/0.39 12/0.47 No.3 25/0.98 1:90 23/50.7
TSL200 200/7.87 100/3.94 236/9.29 285/11.22 150/5.91 12/0.47 14/0.55 No.3 30/1.18 1:90 30.5/67.2
TSL250 250/9.84 110/4.33 286/11.26 328/12.91 170/6.69 12/0.47 14/0.55 No.3 30/1.18 1:90 44/96.9
TSL320 320/12.60 120/4.72 360/14.17 410/16.14 210/8.27 14/0.55 18/0.71 No.4 40/1.57 1:90 75/165.4
TSL400 400/15.75 150/5.91 450/17.72 525/20.67 260/10.24 14/0.55 18/0.71 No.4 40/1.57 1:90 145/319.4
ACCURACY TEST:    (mm/in.)

ITEM

 TOLERANCE
Flatness of table surface (No allowing convex) 300:0.015 11.81:0.0006

Axial run-out of table surface

 0.015/0.0006

Parallelism between table surface and bottom surface

 300:0.02 11.81:0.0008

Radial run-out of center line of spindle tapered hole (b: far from table face 1004)

 a):0.010/0.0004 b):0.020/0.0008
Parallelism between center line of spindle and supporting face for vertical mounting 0.030/0.0012
Parallelism between center line of spindle and flank of locating key for vertical mounting 0.020/0.0008
Parallelism between conjunctive line of centers of table and tailstock to supporting face for vertical mounting 0.020/0.0008
Parallelism between conjunctive line of centers of spindle and tailstock corresponding to locating flank of locating key for vertical mounting 0.020/0.0008
Indexing accuracy 60"
กก กก
กก